Controller for the Soleil Sun Alarm Clock

Using the controller with the Sun Alarm Ultima Clock you will get a much brighter simulated sunrise  

The Sun Alarm Clock by itself works perfectly for the majority of people, but some people need a brighter simulated sunrise to wake them up. The SA-300W Controller shown here gives you a brightness up to 300 watts. You simply connect it to your Sun Alarm clock and to any regular lamp, with a maximum bulb wattage of 300 watts, and awaken to a much brighter simulated sunrise from your lamp. It does not have to be a 300-watt bulb. It can be 300 watts or less. All Sun Alarm Clock features still work with your lamp.

Details & Features:

• Dimensions of Controller: ---3-3/4" long x 2-1/2" wide x 2" deep
• Gives a Simulated Sunrise up to 300 Watts - The controller uses the light from any table lamp. You can use a bulb of 300 watts or less. It's your choice.
• Light Comes from Your Lamp, not the Clock - Through the controller, the Sun Alarm Clock operates your lamp, so your lamp will simulate the sunrise and sunset instead of the Sun Alarm Clock.
• All Features Still Work - All Sun Alarm Clock Features still work as if you were using just the clock by itself.
• 2 Controller Settings - There is a switch with 2 settings, one for dawn simulated sunrise, which simulates the sunrise according to your settings on the clock, or full power, which operates your lamp at full wattage. The Full Power mode also allows you to use the controller with light boxes to help treat Seasonal Affective Disorder.
• What Plugs into What - It's very easy to set up. The controller plugs into an electrical outlet, the Sun Alarm Clock plugs into an electrical outlet. Then, the lamp plugs into the controller and the controller plugs into the Sun Alarm Clock. All the features and settings of the clock still work, but the sunrise and sunset operate through the lamp instead of the clock.

Buy the Soleil Sun Alarm Clock