Wall Fountain Helpful Facts

Wall Fountains with Slate by Adagio

This information page is in regard to the slate fountains in this series. It covers all aspects of important details you would probably like to know about pertaining to these magnificent fountains. It's all here, and it is very helpful. If this page does not address some of your questions or issues, please feel free to contact us. It will be our pleasure to assist you.

Click here for a video of assembly, care and maintenance instructions.

The Slate:
All the slate stones are specially quarried and shipped from India. The slate stones of India are renowned worldwide for their unique beauty and elegance. For all the fountains in this series, each slate stone is hand cut and its edges are chiseled to perfection, making your fountain a one-of-a-kind masterpiece. Because no two slates are alike, your fountain is an original. Therefore, your slate may vary somewhat in color and texture from the pictures seen here on our website. The Black slate and Green slate have some variation of color tones, however, the most dramatic difference is seen in the remarkable Rajah (multi-color) slate, which varies in its range of greens, reds, golds, and rusts.  We now offer a Rainforest Brown Marble and Rainforest Green Marble stone as well.

The Metal Hood and Basin:
Copper - All the copper components are fashioned from very high-grade copper that is mined in a Utah copper mine. The unique marble-like finish is burned onto the copper one piece at a time by skilled artisans. A clear coat finish (similar to what is used on automobiles) is then applied to the copper to give it a high gloss finish, which creates an added beauty and protects the copper from naturally oxidizing (turning green) in spots over time.

Stainless Steel - As an alternative to copper, you can have your metal hood and basin in a beautiful, high quality milled stainless steel. Stainless Steel creates a very contemporary look and is very striking.

Square or Rounded Edges - With each fountain, regardless of what metal you choose, you can get either square or rounded edges on the hood, basin and splashguard.

The Spillway Water Distribution System
Unlike many wall and floor fountains on the market where the water comes out of little holes on top and flows down in an uneven way, all the fountains in this series include a state-of-the-art Spillway Water Distribution System that creates 100% Water Coverage in the water flow.

NO DRIPPING OR LEAKING:
The fountains in this series come with an industrial strength 1/8" thick polypropylene plastic liner, form fitted into the metal tray. This keeps the fountain from dripping or leaking water. Before each fountain leaves the factory, it is water tested 3 times to make sure there is no dripping or leaking.

Wall Fountain Installation:
These wall fountains can be installed on almost any type of wall, including cinder block walls and sheet rock walls with either wood or metal studs. The installation is relatively easy, but it does usually require two people to make it go more smoothly. Before installing the fountain, you can install an electrical outlet in the wall directly behind where the slate will be placed. This is not a requirement, but doing this will eliminate the visibility of the electrical wires and make the overall look of the fountain more beautiful. See below for details about electrical installation.
Comprehensive easy-to-read instructions with pictures are included.

Electrical Recommendations for Wall Fountains:
Although not required, you can install a GFI electrical outlet in the wall behind where the slate will be placed prior to installing the fountain. Doing so is more esthetically pleasing as it will enable you to keep the electrical cord hidden from sight. Place the electrical outlet near the center of the slate at least 18 inches above the fountain's lower tray (at the bottom) and at least 24 inches below the metal hood (at the top of the fountain). For the double and triple slate falls, the electrical outlet should be placed behind the left most slate as you face it on the wall.

If you choose to install an electrical outlet behind the slate, it is recommend that you wire it to a wall switch so you can easily turn your fountain on and off without having to reach for the plug behind the slate. Also, if you'd like to control the fountain's halogen lights and the water flow separately, it is recommended that you install an additional clock box outlet behind the slate, so there is one for the pump and one for the lights. Then you wire that to a double wall switch, so one switch controls the pump and the other one controls the fountain lights.

Water Usage:
How often you have to add new water to the metal basin depends on the dryness or humidity of your environment. In the summer, water tends to evaporate more quickly, which means you will have to add water more often. In cooler months, you will probably not have to add water that often. You always want to have enough water in the basin so that the pump is fully submerged. If the pump is operating while it is not fully submerged, you can damage it over time.

It is highly recommended to use Distilled Water with these fountains. We realize that may not always be possible, but do your best. Regular tap water has minerals which can create mineral deposits in your fountain over time, and can possibly shorten the life of your water pump.

Maintenance:
Copper - It is recommended that about every 60 days, you apply a hard shell car wax to the outside of the copper Water Tray (basin) and upper half front side of the copper Splash Guard. This will help prevent the water from penetrating the clear coat finish. If you get white spotting on your copper and the wax does not remove it, apply Calcium Lime Remover (CLR) or Lime-Away to those spots, and rinse it very thoroughly. Stainless Steel - DO NOT apply wax to the stainless steel. If spotting occurs, apply Calcium Lime Remover or Lime-Away as noted above. . Water - You may apply 1-3 drops of bleach to the water weekly to avoid algae growth and unfavorable odors. Never use more than this; too much bleach will dull the slate.

Slate Wall Fountains * ALL Wall Fountains * ALL Fountains