This 1400JF 1/4HP Pond Aerating Fountain will add beauty to any backyard pond or water garden.  Not only will this lake fountain look great, it will enhance the life of your pond by reducing algae growth.  This fountain comes complete with everything you need, even lights if you want!  The low power consumption of these fountains makes continuous operation affordable.

The 1400 JF Pond Fountain comes with 5 interchangeable fountain patterns that can be changed in as little as 30 seconds. Hawk's nest pattern pictured above, 4 other patterns are pictured below.

Order the LED Light Ring to illuminate your fountain at night!  Over 100,000 hours of expected light life, and thanks to the LED technology, the lights consume very small amounts of power.  The LED system includes a low voltage transformer to convert your 120V power to 12V used by the light ring.  (Lighting example to left)

• 1/4HP, 120V motor with timer
• Will operate in as little as 12" of water
• Includes motor, float with mooring ropes, underwater rated 50' power cord, C-25, 120 volt GFCI protected electrical control panel, and 5 interchangeable spray nozzles with patterns ranging from 4' tall to 10' wide.
• ETL approved to UL and CSA standards
• Made in the USA
• 2 Year Limited Warranty

5 year pond owner -
Yesterday I recieved this kasco unit. I love it this fountain. Has 7 spray patterns not 5. If you remove the nozzle without removing the upper pump housing you get a 3 ft tall geyser. If you remove the upper pump housing without using the Hawk or Eagle you get a smaller version of the Hawk or Eagle. The pond I run mine in is an 8 ft by 5 ft pond, With 19 in of water. But if you have a pond at least 5 ft by 5 ft with at least 14 in deep this unit will do great. The installation is so easy. Just select the nozzle, float the unit in the water, anchore it, plug it in, and enjoy.